Garware Net Installation Process — Bird Nets, Sports Nets & Safety Nets
Here is exactly how our crew installs genuine Garware netting: the timeline for each type of job, the site preparation you should complete before we arrive, and the measurements we need from you to quote accurately. Material is priced at ₹488–₹720/- per kg, depending on grade, and the site visit is free anywhere in Chennai.
Installation timeline at a glance
| Net type | Typical timeline | Steps |
|---|---|---|
| Garware bird nets | 1 day for most homes; 2–4 days for full apartment blocks and warehouses | 6 stages |
| Garware sports nets | 2–4 days on an existing structure; 7–12 days when new poles and foundations are needed | 6 stages |
| Garware safety nets | 1 day for homes, balconies and staircases; phased floor by floor on construction projects | 6 stages |
Garware bird net installation process — balconies, ducts and terraces
Bird netting is fixed on a stainless steel wire-rope grid so the net stays tight for years without sagging. Most homes are finished in a single visit.
Step-by-step process and timeline
1. Free site measurement
Day 0 — 20–30 minutesOur technician measures every opening, checks the frame material and confirms mesh size (40 mm HDPE for pigeons).
2. Written quote and approval
Same dayYou receive the per-kg Garware material rate plus the installed per-sq.ft price, with the label of the roll we will cut from.
3. Net cutting and border stitching
Next working dayThe Garware roll is cut to your exact size and bordered with PP rope so edges never fray.
4. Anchor and wire-rope grid fixing
1–2 hours per openingSS hooks / eye bolts are drilled at 12–15 inch intervals and 3 mm SS wire rope is tensioned across the opening.
5. Net fitting and tensioning
1 hour per openingThe net is laced to the wire rope with UV-resistant thread, corner by corner, then tensioned so there is no gap for birds.
6. Cleanup, demo and warranty
15 minutesDebris is cleared, the tension is demonstrated to you, and the warranty card plus maintenance advice are handed over.
Overall duration: 1 day for most homes; 2–4 days for full apartment blocks and warehouses
Measurements we need from you
- Balcony or duct opening width x height in feet (each opening separately)
- Number of openings and the floor level of each
- Whether the frame is concrete, brick, granite or metal (decides the anchor type)
- Terrace / shaft length x breadth for horizontal covers
- Any grill, AC unit or clothesline inside the opening we must work around
- Photo of each opening taken from inside, showing the full frame
Site preparation checklist
- Clear pots, furniture and clothes-drying racks from the opening
- Remove existing droppings and nesting material, or ask us to add cleaning to the quote
- Arrange association / society permission for facade work if required
- Keep a power point available for the drilling machine
- Keep pets and small children away from the work area for 2–3 hours
Garware sports net installation process — cricket, football and golf
Sports netting needs a proper frame: poles or an existing structure, a tensioned top and bottom rope, and a net cut for the exact playing area. We plan it bay by bay so the ground stays usable.
Step-by-step process and timeline
1. Site survey and layout
Day 0 — 45–60 minutesWe measure the ground, mark pole positions and confirm net height, mesh and twine for the sport.
2. Drawing and quote
Within 24 hoursYou get a layout with pole count, net panel sizes, Garware material weight in kg and the installed total.
3. Foundations or base plates
1–2 days plus 3–5 days curing where foundations are castPole foundations are cast (or base plates anchored on concrete) and left to cure.
4. Pole erection and rope grid
1–2 daysGI poles are erected, plumbed and braced, then top, bottom and intermediate wire ropes are tensioned.
5. Net panel fitting
1–2 daysBordered Garware panels are laced to the rope grid panel by panel — sides first, then roof.
6. Tensioning, handover and trial
Half a dayFinal tensioning, corner tie-offs, a play trial and the maintenance schedule.
Overall duration: 2–4 days on an existing structure; 7–12 days when new poles and foundations are needed
Measurements we need from you
- Playing area length x width in feet (or pitch / cage lane dimensions)
- Required net height at the sides and at the roof
- Number of lanes, goals or bays to be covered
- Existing structure details — pole spacing, pole height, GI pipe diameter, or none
- Ground surface: turf, concrete, mud or matting (decides base plates vs foundation)
- Site photos from two corners plus one from the middle of the ground
Site preparation checklist
- Mark the final playing-area boundary before the site visit
- Clear the perimeter of stored material so pole positions are accessible
- Confirm access for a ladder / scaffolding tower and, for high masts, a lift
- Arrange water and power near the pole line for foundation work
- Confirm any local body or landlord permission for foundations
Garware safety net installation process — construction, balconies and industry
Safety nets are life-saving equipment, so anchoring and border ropes matter as much as the net. Construction sites are covered floor by floor as the structure rises; homes are usually finished in one visit.
Step-by-step process and timeline
1. Risk and measurement visit
Day 0 — 30–60 minutesWe measure the area, identify anchor points and recommend the Garware net grade for the fall load.
2. Quote with net specification
Same day or next morningPer-kg material rate, net grade, anchor schedule and the installed per-sq.ft price in writing.
3. Fabrication and border roping
1–2 daysPanels are cut and bordered with 10–12 mm PP rope, with corner eyelets for anchoring.
4. Anchor installation
1 day per floor plateEye bolts / anchor hooks are fixed to slab edges, columns or parapets at the designed spacing.
5. Net fixing bay by bay
1–2 days per floorNets are hoisted, tied at every anchor and overlapped at joints, with no unprotected gaps left.
6. Inspection, handover and re-checks
Ongoing through the projectTension and anchor checks are documented, then re-checked as the structure rises or after storms.
Overall duration: 1 day for homes, balconies and staircases; phased floor by floor on construction projects
Measurements we need from you
- For buildings under construction: floor plate length x width and the number of floors
- For balconies and staircases: opening width x height, and the drop height
- Anchor points available — RCC slab, column face, parapet, steel truss
- Required net type: 2.5 mm braided, 4 mm PP, 5 mm braided or triple layer
- Working height / floor level, for access and safety planning
- Photos of the anchor line and the area to be protected
Site preparation checklist
- Keep the anchor line free of shuttering material and scaffolding clamps
- Confirm the site safety officer or association contact for access
- Arrange scaffolding or a lift where the anchor line is above 30 ft
- Stop other work in the bay being netted for the duration of fixing
- For homes, clear the balcony or staircase edge and keep pets indoors
Garware net installation — frequently asked questions
How long does Garware net installation take?
Bird nets and home safety nets are usually completed in one visit of 2–5 hours. Sports nets take 2–4 days on an existing structure, or 7–12 days if new poles and foundations are required. Construction safety nets are fixed floor by floor as the building rises.
What measurements do you need before quoting?
Width x height in feet for each opening or bay, the number of openings, the frame or anchor material, and the floor level. A photo taken from inside the opening lets us confirm the fitting method without a second visit.
Do I need to prepare the site before your team arrives?
Clear pots, furniture and stored material from the work area, arrange a power point, and get association or site permission where facade or foundation work is involved. Everything else — drilling, hardware, cleanup — is handled by our crew.
Do you install nets on rented or high-rise properties?
Yes. For rented homes we use removable hook fixing that leaves minimal marks. For high-rise work above 30 ft we plan scaffolding or lift access and follow harness and anchor safety procedures.
Is the installation covered by a warranty?
Yes — the Garware material carries the manufacturer's quality standard and our workmanship is covered by an installation warranty, with free re-tensioning visits during the warranty period.
Want a price before booking? Use the Garware net quote calculator on our dealer page.
See finished jobs before you decide
Our portfolio shows the site before we started and the same opening after installation, with the material, area and days taken for each job.
Garware net installation in Chennai — what we install, how we price it and when we can come
Dedicated installation teams across Chennai localities and every major city in Tamil Nadu & Andhra Pradesh. In Chennai we work mainly on apartments, independent houses, schools and commercial buildings. The job we are called for most here is balcony safety nets, pigeon nets and bird-proofing. Garware netting is ₹488–₹720 per kg. Every quote follows a free site measurement — nothing is estimated over the phone.
Local site conditions we plan for in Chennai
Every fixing uses stainless steel hardware and UV-stabilised netting so the installation survives sun, rain and coastal wind. That decision is made on site, not in the office, because the frame material and working height change the hardware more than the netting itself.
Buildings and openings we cover
- Balconies, windows, French windows and grill-front openings
- Duct shafts, light wells, stilt parking and lift-lobby gaps
- Terraces, parapets, staircase voids and open atriums
- Schools, hostels, factories, warehouses and sports grounds
Chennai neighbourhoods and nearby stretches we reach
All main residential and commercial pockets of Chennai. Dedicated installation teams cover Chennai localities and every major city in Tamil Nadu and Andhra Pradesh.
How a garware net installation job runs in Chennai
1. Free measurement and written quote
A technician measures every opening in feet, checks the frame, and gives you a per-sq.ft rate in writing before any drilling starts.
2. Fabrication and fixing
Netting is cut and rope-bordered to your exact size, anchors go in at 12–15 inch intervals, and stainless steel wire rope is tensioned across the opening before the net is laced on.
Materials used on Chennai sites
UV-stabilised HDPE and braided nylon netting, SS 304/316 hooks and eye bolts, 2.5–3mm stainless wire rope, turnbuckles for re-tensioning, and UV-resistant lacing thread.
Warranty and after-service
Every installation carries a written warranty on netting and hardware, with on-call re-tightening and repair visits in Chennai.
Recent garware net installation work — before & after
Photos from our own job records in and around Chennai. The first frame is the site as we found it, the second is the finished installation.
Floodlit football turf boundary nets
Turf arena, Chennai
Nylon boundary net · 4,200 sq.ft · 20ft height
Double-layer construction safety net
High-rise site, Chennai
Knotless braided net · 8,600 sq.ft · slab anchors
Balcony safety net for a 4th-floor flat
Apartment, Pallikaranai, Chennai
45mm mesh HDPE net · 132 sq.ft · SS 304 hooks
Book a Chennai site visit
Call or WhatsApp +91 96000 35014 with your area and rough opening sizes and we will confirm a measurement slot, usually within 24–48 hours.